What is the Makeblock XTool D1? 2kw Laser Cutting Machine
XTool D1 is a laser cutter that has been produced by Makeblock. 2kw Laser Cutting Machine
The business was established in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic College. The business is committed to creating innovative products to aid individuals share themselves via production. Since its creation, Makeblock has released numerous academic robots, in addition to a coding platform for youngsters. It also introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can cutting and also engraving a range of products. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, and also can be made use of for several jobs. In addition to inscription, the D1 can also be utilized for various other projects, consisting of creating jewelry and also light tones.
The D1 is a DIY kit that can be assembled in only regarding half a hr. Its room is collapsible, permitting simple mobility and reliable ventilation. It is additionally made from flame-retardant polyester, making it secure from dirt fragments. The unit likewise secures the functioning surface area under the device.
The XTool D1 is equipped with a laser component that is capable of engrave on metals as well as several various other materials. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This permits finer inscription as well as higher precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to inscribe on a vast array of materials. The D1 likewise has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be utilized to import laser designs from cost-free vector sites, consisting of Etsy. The D1 can likewise be connected to a computer system through USB or WiFi. It can likewise transfer data by means of Wi-Fi or a big ability TF card.
The D1 is capable of etching on Poplar plywood, which is among the most typically made use of timbers for laser cutters. The D1 can additionally reduce on other woods, including difficult maple, walnut, and rosewood. Its laser head is flexible, permitting a 50mm variety. It can additionally process materials approximately 10mm thick, which means that it is able to engrave on a wide variety of products. The D1 is developed for both home as well as service use.
The XTool D1 is available in 2 designs: the 20W variation and also the 5W design. The 20W variation has a bigger laser head, as well as a smaller sized working area. The 5W version has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a much faster machine. 2kw Laser Cutting Machine
The D1 features a steel framework, which supplies maximum stability as well as longevity. It likewise has a concurrent belt to enhance activity accuracy. The belt’s modest stress is needed for precision, especially when relocating at high speeds. The synchronous belt can likewise assist the maker keep steady and also decrease resonance. It can additionally eliminate the motion void, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It creates clear lines down to 0.06 mm. This makes it an excellent selection for almost all etching jobs. Its style is secure as well as trustworthy. It is ideal for small companies and hobbyists.
It can engrave various kinds of steel and also wood. It has the capability to reduce eight to tenmm plywood in one pass. It additionally has the capacity to cut natural leather as well as acrylic.
It comes with a variety of devices. You can get the bundle pack that includes the Air Help Set and also Honeycomb Working Panel. It costs $119 and also $269, specifically. You can additionally obtain a 1064nm laser head. This head lowers melt marks in plastic and also is particularly beneficial for delicate jewelry designs. It also has an activity sensing unit and also flame detection sensor.
It likewise includes an emergency situation stop button. It can be managed via Wi-fi and also can import laser layouts from cost-free vector sites like Etsy. You can also manage it using the Makeblock XTool D1 app on Android and also iOS.
It has an excellent focus device. The laser crosshairs relocate as required and move to the framework of the art work. This makes the inscribing very specific. It can additionally be utilized to produce a thickening result, which can be helpful when engraving huge products.
The XTool D1 Pro has improved functions and also laser power. It uses a 20W laser module to create a beam that reduces things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater rate. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is very clever. Beside the laser module, there is a swivelling arm which you pull out when you wish to concentrate the laser. It assures that you go down the directly the appropriate range from the product. Then you tighten the thumb screw as well as pivot the arm back up. 2kw Laser Cutting Machine
XTool D1 Special Features
Here are a few of the top Special Functions of the XTool D1:
Wireless Connection
Machine can be linked through USB or a WiFi. As well as you can additionally regulate with a smartphone app on Android or iOS.
Trimming and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The device can reduce wood, especially Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would certainly avoid some plastics like PVC and plastic since it launches hydrogen chloride gas while being cut. This gas is harmful and also really corrosive (your equipment will certainly corrosion quickly).
We have actually checked the device with engraving and cutting different products. You will certainly discover the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other makers. This must allow for even more accuracy and also much less mechanical wobble when inscribing at high speeds. 2kw Laser Cutting Machine
Advanced Stepper Motor Drivers
The maker has a really advanced controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. By doing this the motors are very precise as well as quiet. The motorists additionally sustain homing procedure without making use of limitation changes as the motorists measure existing with electric motors and also spot the limit in this manner. This is why this machine does not need physical limitation changes for homing.
The machine has drivers for 3 axis– so you can connect in the roller system as a Z axis rather than having to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver tool automatically stops if an unintentional touch happens. This is fantastic for individuals that are worried regarding security. The device is likewise compatible with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have actually the artwork prepared, you can make use of the application to set up the laser. You can also personalize the laser settings and develop custom-made art work. The app also consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can engrave over 100 products. The laser engraver device is easy to use as well as comes with a protective cover. The machine has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is a very functional engraving maker. It cam be made use of to engrave on all sorts of materials/.
Here is a listing of products and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out maker. Specific, quick and well built. It comes with a costs price, but it is worth it for somebody that wants a great as well as virtually a commercial quality table leading laser engraver capable of fast cutting and also specific engraving thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The first laser engraving as well as cutting maker on our listing is XTool D1 pro, the very best option to Glowforge. It remains in top place because it has received the Red Dot Layout 2022 Award. The impressive layout as well as modern technology set this machine apart from other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and also XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and engrave a massive range of materials, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription as well as reducing equipment that works with a wide range of products, including different sorts of wood. Its powerful and very concentrated laser can quickly reduce and also inscribed timber with utmost accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is particularly made for steel as well as plastic inscription. It can inscribe various steels, consisting of light weight aluminum as well as precious metals. It can likewise do colored engraving on various steels, including aluminum.