What is the Makeblock XTool D1? 2mm Stainless Steel Laser Cutting Machine
XTool D1 is a laser cutter that has been developed by Makeblock. 2mm Stainless Steel Laser Cutting Machine
The firm was established in 2012 by Jasen Wang, that researched airplane design at Northwestern Polytechnic College. The company is committed to producing ingenious products to aid individuals share themselves with production. Since its development, Makeblock has launched a number of academic robots, in addition to a coding platform for kids. It also released the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of reducing as well as inscribing a selection of products. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, as well as can be used for several tasks. In addition to inscription, the D1 can likewise be used for other projects, consisting of producing fashion jewelry and lamp shades.
The D1 is a DIY kit that can be set up in just about half an hour. Its room is collapsible, permitting easy transportability and efficient air flow. It is additionally constructed from flame-retardant polyester, making it risk-free from dust fragments. The room additionally safeguards the functioning surface area under the device.
The XTool D1 is furnished with a laser module that can engrave on metals and lots of other materials. It has an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This permits finer engraving as well as greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to engrave on a wide range of products. The D1 likewise has a built-in smart device application that can be downloaded from the Android Shop or the Apple Application Store. The application can be utilized to import laser designs from free vector websites, including Etsy. The D1 can likewise be linked to a computer by means of USB or WiFi. It can likewise move data via Wi-Fi or a big capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most generally used woods for laser cutters. The D1 can likewise reduce on various other woods, consisting of tough maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can also process products approximately 10mm thick, which indicates that it has the ability to engrave on a wide range of products. The D1 is created for both house as well as service use.
The XTool D1 comes in two models: the 20W version and also the 5W design. The 20W variation has a bigger laser head, and a smaller working area. The 5W version has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster equipment. 2mm Stainless Steel Laser Cutting Machine
The D1 features a steel structure, which supplies maximum security and also resilience. It additionally has a synchronous belt to enhance activity precision. The belt’s moderate tension is required for accuracy, especially when moving at high speeds. The simultaneous belt can also aid the equipment remain steady and also minimize vibration. It can also get rid of the movement space, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It generates clear lines to 0.06 mm. This makes it an excellent selection for nearly all etching jobs. Its design is risk-free and reliable. It is excellent for local business as well as hobbyists.
It can engrave various kinds of metal and wood. It has the capability to reduce 8 to tenmm plywood in one pass. It likewise has the ability to cut leather as well as acrylic.
It features a number of devices. You can purchase the bundle pack that includes the Air Assist Establish as well as Honeycomb Working Panel. It sets you back $119 and also $269, specifically. You can likewise get a 1064nm laser head. This head lowers melt marks in plastic as well as is specifically valuable for fragile jewelry designs. It likewise has a motion sensing unit as well as fire discovery sensing unit.
It additionally includes an emergency quit switch. It can be regulated via WiFi as well as can import laser layouts from free vector websites like Etsy. You can likewise manage it via the Makeblock XTool D1 app on Android and also iOS.
It has an excellent emphasis system. The laser crosshairs move as required and also transfer to the frame of the art work. This makes the etching really accurate. It can additionally be made use of to develop a thickening impact, which can be valuable when etching large products.
The XTool D1 Pro has improved attributes as well as laser power. It uses a 20W laser module to produce a light beam that cuts objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a higher rate. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this maker is extremely clever. Alongside the laser module, there is a pivoting arm which you take out when you wish to focus the laser. It ensures that you drop the head on the proper range from the material. After that you tighten up the thumb screw and also pivot the arm back up. 2mm Stainless Steel Laser Cutting Machine
XTool D1 Special Features
Here are a few of the top Unique Features of the XTool D1:
Wireless Connection
Device can be attached by means of USB or a WiFi. And you can also regulate with a smartphone application on Android or iphone.
Trimming and also Inscription Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The device can cut wood, particularly Poplar plywood which is soft and it is the favored wood for all laser cutters.
I would avoid some plastics like PVC and vinyl because it launches hydrogen chloride gas while being cut. This gas is hazardous and extremely destructive (your maker will certainly rust rapidly).
We have actually examined the equipment with inscription and also reducing various materials. You will discover the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other devices. This ought to enable even more precision and much less mechanical wobble when inscribing at high speeds. 2mm Stainless Steel Laser Cutting Machine
Advanced Stepper Motor Drivers
The device has a really sophisticated controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. By doing this the motors are really accurate and also silent. The chauffeurs also support homing procedure without utilizing restriction changes as the vehicle drivers gauge current via motors and also discover the limit in this manner. This is why this equipment does not require physical limitation changes for homing.
The machine has drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to separate among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver device automatically stops if an unintentional touch takes place. This is wonderful for individuals that are worried regarding safety. The tool is likewise suitable with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. When you have actually the artwork prepared, you can use the application to set up the laser. You can additionally customize the laser setups as well as create custom-made artwork. The application additionally includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can etch over 100 products. The laser engraver tool is easy to use and also comes with a safety cover. The device has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is a very flexible inscribing maker. It cam be used to inscribe on all types of products/.
Here is a checklist of materials and attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out equipment. Accurate, quick and well constructed. It comes at a costs price, however it is worth it for someone that wants an excellent and also almost an industrial quality table leading laser engraver capable of fast cutting as well as accurate engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser inscription as well as cutting equipment on our list is XTool D1 pro, the best alternative to Glowforge. It remains in first place because it has gotten the Red Dot Design 2022 Award. The superior style as well as advanced modern technology set this equipment besides other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and also XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a massive range of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving as well as cutting maker that is compatible with a variety of materials, including various kinds of wood. Its powerful as well as highly focused laser can conveniently cut and also inscribed timber with utmost precision and accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is especially made for steel and also plastic inscription. It can inscribe different steels, including light weight aluminum and precious metals. It can likewise do tinted engraving on different steels, including aluminum.
2mm Stainless Steel Laser Cutting Machine 2mm Stainless Steel Laser Cutting Machine