What is the Makeblock XTool D1? 50 Watt Laser Cutting Machine
XTool D1 is a laser cutter that has been produced by Makeblock. 50 Watt Laser Cutting Machine
The company was established in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic College. The company is devoted to developing ingenious products to aid individuals reveal themselves through development. Because its development, Makeblock has actually launched numerous educational robotics, along with a coding system for youngsters. It additionally introduced the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can reducing and also etching a variety of materials. Its laser can cut out intricate shapes much faster than a scroll saw or jigsaw, and also can be used for various jobs. Along with engraving, the D1 can additionally be used for other tasks, consisting of developing jewelry and light shades.
The D1 is a DIY package that can be put together in just about half a hr. Its enclosure is foldable, allowing for simple portability as well as effective ventilation. It is likewise made from flame-retardant polyester, making it secure from dust bits. The room likewise shields the working surface under the device.
The XTool D1 is geared up with a laser module that can engrave on steels and also lots of various other products. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer inscription and higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to engrave on a vast array of products. The D1 also has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple Application Shop. The application can be made use of to import laser layouts from totally free vector sites, including Etsy. The D1 can also be linked to a computer system via USB or WiFi. It can additionally transfer data via Wi-Fi or a large capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of the most commonly utilized woods for laser cutters. The D1 can additionally cut on various other woods, including difficult maple, walnut, and also rosewood. Its laser head is flexible, permitting a 50mm array. It can likewise refine products as much as 10mm thick, which suggests that it has the ability to etch on a wide variety of products. The D1 is made for both house as well as service use.
The XTool D1 can be found in two versions: the 20W variation as well as the 5W version. The 20W version has a larger laser head, as well as a smaller sized working location. The 5W design has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster device. 50 Watt Laser Cutting Machine
The D1 includes a steel framework, which supplies maximum stability and longevity. It also has a concurrent belt to enhance motion precision. The belt’s moderate stress is needed for precision, specifically when moving at high speeds. The concurrent belt can additionally help the equipment stay steady and also decrease resonance. It can also get rid of the activity void, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It generates clear lines to 0.06 mm. This makes it an excellent choice for almost all inscribing tasks. Its design is safe and also trustworthy. It is perfect for local business as well as enthusiasts.
It can inscribe different types of metal as well as wood. It has the capacity to cut 8 to tenmm plywood in one pass. It additionally has the capability to reduce leather and acrylic.
It features a variety of devices. You can acquire the package pack that consists of the Air Help Set as well as Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can also get a 1064nm laser head. This head reduces shed marks in plastic as well as is especially useful for delicate jewelry layouts. It also has an activity sensor as well as fire discovery sensor.
It also includes an emergency quit button. It can be controlled via WiFi and can import laser layouts from totally free vector sites like Etsy. You can also control it by means of the Makeblock XTool D1 application on Android and iOS.
It has a great focus system. The laser crosshairs relocate as needed and relocate to the frame of the art work. This makes the inscribing very precise. It can also be used to produce a thickening result, which can be helpful when engraving huge things.
The XTool D1 Pro has actually boosted attributes as well as laser power. It utilizes a 20W laser module to create a beam of light that reduces items in one pass. It can cut through 8mm black acrylic and 10mm basswood. It likewise has a greater speed. It can reach inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this equipment is very smart. Next to the laser component, there is a rotating arm which you take out when you want to concentrate the laser. It assures that you go down the directly the right range from the material. After that you tighten up the thumb screw and pivot the arm back up. 50 Watt Laser Cutting Machine
XTool D1 Special Features
Here are some of the leading Unique Attributes of the XTool D1:
Wireless Connection
Device can be connected using USB or a Wi-fi. As well as you can additionally regulate with a mobile phone application on Android or iphone.
Cutting and Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The machine can reduce wood, particularly Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would avoid some plastics like PVC and plastic because it launches hydrogen chloride gas while being cut. This gas is harmful as well as extremely destructive (your equipment will certainly rust quickly).
We have actually examined the maker with engraving and also reducing various products. You will find the results of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other devices. This need to permit more precision and less mechanical wobble when etching at broadband. 50 Watt Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The equipment has a very innovative controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. This way the electric motors are really specific and also silent. The motorists also support homing treatment without using limitation switches as the drivers measure present with motors as well as detect the limit by doing this. This is why this device does not require physical limit switches for homing.
The machine has motorists for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to detach among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device instantly quits if an unexpected touch happens. This is great for people who are worried about security. The device is also compatible with Windows and also Mac OS systems.
The XTool D1 software is very easy to use. Once you have the art work prepared, you can use the application to set up the laser. You can likewise tailor the laser setups as well as create custom-made art work. The app additionally includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can etch over 100 products. The laser engraver device is easy to use as well as comes with a protective cover. The equipment has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a really versatile engraving equipment. It cam be used to etch on all sorts of products/.
Right here is a list of products as well as attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered maker. Specific, fast and also solidly constructed. It comes at a costs price, however it deserves it for someone that wants a great and also nearly a commercial grade table top laser engraver with the ability of fast cutting and also specific engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving and cutting equipment on our listing is XTool D1 pro, the best option to Glowforge. It remains in starting point because it has obtained the Red Dot Design 2022 Award. The outstanding style and advanced innovation established this device aside from other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and engrave a huge variety of materials, from something as slim as tissue paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser engraving as well as reducing device that is compatible with a large range of products, consisting of different sorts of timber. Its powerful as well as highly focused laser can quickly reduce and engraved timber with ultimate precision and accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is specifically created steel and also plastic engraving. It can inscribe different metals, including light weight aluminum and also rare-earth elements. It can additionally do tinted etching on different metals, consisting of aluminum.