What is the Makeblock XTool D1? Ccd Laser Cutting Machine
XTool D1 is a laser cutter that has actually been developed by Makeblock. Ccd Laser Cutting Machine
The company was developed in 2012 by Jasen Wang, that researched airplane style at Northwestern Polytechnic University. The business is devoted to developing ingenious items to assist individuals share themselves via creation. Considering that its creation, Makeblock has launched a number of academic robotics, along with a coding platform for children. It additionally launched the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that is capable of reducing and inscribing a selection of materials. Its laser can remove detailed shapes much faster than a scroll saw or jigsaw, and also can be used for various projects. Along with inscription, the D1 can additionally be used for various other projects, consisting of producing fashion jewelry and also lamp tones.
The D1 is a DIY set that can be assembled in just concerning half a hr. Its enclosure is foldable, enabling very easy transportability and also reliable ventilation. It is likewise made of flame-retardant polyester, making it safe from dirt particles. The enclosure likewise shields the functioning surface area under the device.
The XTool D1 is geared up with a laser component that is capable of engrave on steels as well as numerous various other materials. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This permits finer engraving and greater accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it feasible to engrave on a vast array of materials. The D1 also has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple App Store. The application can be used to import laser layouts from complimentary vector sites, including Etsy. The D1 can additionally be linked to a computer using USB or WiFi. It can likewise transfer information by means of Wi-Fi or a huge ability TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of one of the most commonly utilized woods for laser cutters. The D1 can additionally reduce on various other woods, consisting of hard maple, walnut, and rosewood. Its laser head is flexible, permitting a 50mm array. It can also process materials as much as 10mm thick, which means that it is able to engrave on a wide variety of materials. The D1 is made for both residence and also service use.
The XTool D1 is available in two designs: the 20W version and also the 5W version. The 20W variation has a larger laser head, and also a smaller sized working location. The 5W version has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster machine. Ccd Laser Cutting Machine
The D1 features a steel structure, which gives maximum stability and also toughness. It additionally has a concurrent belt to boost motion accuracy. The belt’s modest tension is needed for precision, specifically when moving at high speeds. The simultaneous belt can additionally help the equipment remain secure and minimize resonance. It can also get rid of the motion void, enabling fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb choice for nearly all engraving tasks. Its design is risk-free and also dependable. It is ideal for small companies and enthusiasts.
It can inscribe different sorts of metal as well as wood. It has the capacity to reduce 8 to tenmm plywood in one pass. It also has the ability to cut leather and polymer.
It includes a number of devices. You can acquire the package pack that consists of the Air Help Establish and also Honeycomb Working Panel. It costs $119 and also $269, respectively. You can also obtain a 1064nm laser head. This head decreases burn marks in plastic and also is particularly useful for delicate jewelry layouts. It also has an activity sensing unit as well as flame discovery sensing unit.
It likewise includes an emergency situation stop button. It can be regulated via Wi-fi and can import laser layouts from cost-free vector sites like Etsy. You can also regulate it via the Makeblock XTool D1 application on Android as well as iOS.
It has a great emphasis mechanism. The laser crosshairs move as required and also move to the frame of the art work. This makes the inscribing extremely specific. It can additionally be utilized to produce a thickening impact, which can be useful when engraving large things.
The XTool D1 Pro has actually improved attributes and also laser power. It uses a 20W laser module to develop a light beam that cuts things in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a higher speed. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this equipment is very creative. Next to the laser module, there is a rotating arm which you take out when you intend to focus the laser. It assures that you drop the directly the correct range from the product. Then you tighten the thumb screw and pivot the arm back up. Ccd Laser Cutting Machine
XTool D1 Special Features
Below are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Device can be attached through USB or a WiFi. And also you can likewise regulate with a smart device application on Android or iphone.
Trimming and Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The device can cut timber, particularly Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would certainly avoid some plastics like PVC and plastic considering that it releases hydrogen chloride gas while being cut. This gas is hazardous and also really destructive (your device will rust rapidly).
We have actually examined the equipment with inscription and also reducing different materials. You will certainly discover the results of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other devices. This must permit more precision as well as much less mechanical wobble when inscribing at broadband. Ccd Laser Cutting Machine
Advanced Stepper Motor Drivers
The device has a very sophisticated controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are really specific as well as quiet. The motorists additionally support homing treatment without using limitation switches as the chauffeurs gauge existing through electric motors as well as detect the limit this way. This is why this maker does not require physical restriction switches for homing.
The maker has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis rather than having to separate among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver tool immediately stops if an accidental touch takes place. This is terrific for people who are concerned regarding safety. The tool is likewise suitable with Windows as well as Mac OS systems.
The XTool D1 software application is very easy to use. Once you have actually the artwork prepared, you can make use of the app to set up the laser. You can likewise customize the laser settings and create personalized artwork. The application additionally consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can engrave over 100 materials. The laser engraver device is easy to use and also features a protective cover. The machine has a warranty of year.
XTool D1 Engraving
The XTool D1 is a very flexible etching equipment. It cam be used to engrave on all sorts of products/.
Below is a checklist of materials and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered equipment. Exact, quick and solidly constructed. It comes with a premium cost, yet it deserves it for somebody that desires a good and also practically an industrial grade table leading laser engraver with the ability of quick cutting and exact inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving as well as cutting machine on our list is XTool D1 pro, the best choice to Glowforge. It is in starting point due to the fact that it has obtained the Red Dot Design 2022 Award. The impressive style and also advanced technology established this device aside from other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, as well as XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut as well as etch a massive selection of products, from something as slim as cells paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser engraving and cutting equipment that works with a wide variety of products, including different kinds of timber. Its powerful and also extremely concentrated laser can quickly cut and also etched timber with ultimate precision as well as accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is especially created metal and plastic inscription. It can inscribe numerous metals, consisting of light weight aluminum as well as precious metals. It can also do tinted engraving on numerous metals, consisting of aluminum.