What is the Makeblock XTool D1? China Pvc Laser Cutting Machine
XTool D1 is a laser cutter that has been developed by Makeblock. China Pvc Laser Cutting Machine
The business was established in 2012 by Jasen Wang, that researched airplane design at Northwestern Polytechnic University. The business is devoted to creating ingenious products to aid people express themselves via production. Given that its production, Makeblock has released numerous educational robots, along with a coding system for kids. It additionally introduced the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that is capable of reducing and also engraving a range of materials. Its laser can cut out intricate shapes much faster than a scroll saw or jigsaw, as well as can be used for various tasks. In addition to engraving, the D1 can additionally be used for various other tasks, including developing fashion jewelry as well as light shades.
The D1 is a DIY package that can be set up in only regarding half a hr. Its unit is collapsible, allowing for very easy transportability and also efficient air flow. It is also constructed from flame-retardant polyester, making it secure from dirt bits. The room also protects the working surface under the device.
The XTool D1 is furnished with a laser module that can engrave on steels and numerous various other products. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This enables finer inscription as well as higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to etch on a variety of materials. The D1 likewise has a built-in smartphone application that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be utilized to import laser designs from cost-free vector websites, including Etsy. The D1 can also be linked to a computer through USB or WiFi. It can also transfer information through Wi-Fi or a large capability TF card.
The D1 can inscribing on Poplar plywood, which is among one of the most frequently made use of timbers for laser cutters. The D1 can additionally cut on various other woods, including tough maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm range. It can likewise refine products approximately 10mm thick, which suggests that it has the ability to inscribe on a wide range of materials. The D1 is developed for both home and also business usage.
The XTool D1 can be found in 2 models: the 20W variation and the 5W model. The 20W version has a bigger laser head, as well as a smaller sized working location. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster maker. China Pvc Laser Cutting Machine
The D1 includes a steel structure, which supplies optimum security and toughness. It additionally has a simultaneous belt to enhance motion precision. The belt’s modest tension is required for accuracy, particularly when moving at high speeds. The synchronous belt can additionally assist the maker stay steady and also decrease resonance. It can also remove the movement void, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It creates clear lines down to 0.06 mm. This makes it an excellent choice for mostly all engraving tasks. Its style is secure and reputable. It is suitable for small companies and also enthusiasts.
It can engrave different kinds of metal as well as timber. It has the capacity to cut 8 to tenmm plywood in one pass. It likewise has the capability to reduce leather and also acrylic.
It features a number of devices. You can purchase the bundle pack that includes the Air Assist Set and Honeycomb Working Panel. It sets you back $119 and $269, respectively. You can also get a 1064nm laser head. This head decreases burn marks in plastic as well as is especially helpful for fragile fashion jewelry styles. It also has a motion sensing unit as well as fire discovery sensor.
It also features an emergency quit button. It can be managed with WiFi and also can import laser layouts from totally free vector websites like Etsy. You can likewise regulate it by means of the Makeblock XTool D1 application on Android as well as iphone.
It has a very good emphasis mechanism. The laser crosshairs move as required as well as transfer to the framework of the artwork. This makes the engraving extremely accurate. It can also be utilized to develop a thickening result, which can be beneficial when engraving large items.
The XTool D1 Pro has actually boosted features and laser power. It makes use of a 20W laser module to create a beam of light that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It likewise has a higher speed. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is very creative. Beside the laser module, there is a pivoting arm which you pull out when you wish to focus the laser. It ensures that you drop the directly the correct range from the material. Then you tighten up the thumb screw and also rotate the arm back up. China Pvc Laser Cutting Machine
XTool D1 Special Features
Here are a few of the leading Special Functions of the XTool D1:
Wireless Connection
Maker can be linked using USB or a WiFi. As well as you can additionally control with a smart device app on Android or iphone.
Trimming as well as Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The equipment can cut timber, specifically Poplar plywood which is soft and also it is the recommended timber for all laser cutters.
I would certainly prevent some plastics like PVC as well as vinyl considering that it releases hydrogen chloride gas while being reduced. This gas is hazardous and also very harsh (your machine will corrosion promptly).
We have checked the maker with inscription and reducing various products. You will find the outcomes of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all various other makers. This ought to permit even more precision and much less mechanical wobble when engraving at broadband. China Pvc Laser Cutting Machine
Advanced Stepper Motor Drivers
The maker has an extremely sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. This way the electric motors are really exact and silent. The chauffeurs additionally sustain homing treatment without making use of restriction switches over as the chauffeurs gauge present with electric motors as well as discover the limit in this manner. This is why this device does not require physical limit switches for homing.
The machine has motorists for 3 axis– so you can plug in the roller system as a Z axis instead of having to detach one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool automatically quits if an unexpected touch occurs. This is fantastic for people who are concerned concerning safety. The device is likewise suitable with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. As soon as you have actually the art work prepared, you can use the app to establish the laser. You can additionally personalize the laser setups as well as develop custom-made art work. The application additionally consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can inscribe over 100 products. The laser engraver tool is easy to use as well as comes with a protective cover. The maker has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible etching machine. It cam be used to inscribe on all types of products/.
Right here is a checklist of products and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered machine. Specific, fast and also solidly constructed. It comes with a costs cost, however it deserves it for a person that wants an excellent and nearly an industrial grade table top laser engraver with the ability of fast cutting as well as accurate inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving and cutting maker on our listing is XTool D1 pro, the best choice to Glowforge. It remains in top place because it has gotten the Red Dot Style 2022 Honor. The impressive layout as well as advanced modern technology set this maker apart from various other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, as well as XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce and also etch a huge variety of products, from something as slim as cells paper to something as thick as natural leather and also timber panels.
XTool D1 is a diode laser inscription as well as cutting device that is compatible with a large range of materials, including various sorts of wood. Its powerful as well as extremely focused laser can conveniently cut and engraved wood with ultimate precision and also precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is specifically made for metal and also plastic engraving. It can inscribe various metals, including aluminum as well as rare-earth elements. It can additionally do colored etching on numerous steels, consisting of aluminum.
China Pvc Laser Cutting Machine China Pvc Laser Cutting Machine