What is the Makeblock XTool D1? Cnc Laser Cutting Machine Supplier
XTool D1 is a laser cutter that has actually been developed by Makeblock. Cnc Laser Cutting Machine Supplier
The business was developed in 2012 by Jasen Wang, that examined airplane design at Northwestern Polytechnic College. The business is committed to developing ingenious products to assist people reveal themselves through creation. Considering that its creation, Makeblock has actually launched numerous educational robots, along with a coding platform for youngsters. It also launched the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can cutting as well as engraving a variety of materials. Its laser can eliminate elaborate forms much faster than a scroll saw or jigsaw, and can be made use of for many different tasks. In addition to engraving, the D1 can likewise be used for various other tasks, including developing fashion jewelry as well as light tones.
The D1 is a DIY package that can be assembled in just concerning half an hour. Its room is collapsible, permitting very easy portability as well as reliable air flow. It is additionally made from flame-retardant polyester, making it safe from dirt particles. The room additionally protects the functioning surface under the equipment.
The XTool D1 is geared up with a laser module that can engrave on steels as well as several various other products. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This enables finer engraving and also higher precision.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to etch on a wide range of products. The D1 additionally has a built-in mobile phone app that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be utilized to import laser designs from complimentary vector sites, consisting of Etsy. The D1 can likewise be attached to a computer by means of USB or WiFi. It can likewise transfer data by means of Wi-Fi or a large capacity TF card.
The D1 can inscribing on Poplar plywood, which is among one of the most commonly made use of woods for laser cutters. The D1 can likewise cut on various other woods, consisting of difficult maple, walnut, and rosewood. Its laser head is flexible, enabling a 50mm variety. It can also refine products as much as 10mm thick, which means that it has the ability to etch on a wide array of materials. The D1 is developed for both residence as well as organization use.
The XTool D1 is available in two versions: the 20W variation and also the 5W model. The 20W variation has a larger laser head, and also a smaller sized working location. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster maker. Cnc Laser Cutting Machine Supplier
The D1 includes a steel structure, which provides optimum security and longevity. It additionally has a concurrent belt to enhance motion precision. The belt’s moderate tension is required for accuracy, particularly when relocating at high speeds. The concurrent belt can likewise aid the device remain stable and decrease resonance. It can likewise get rid of the motion gap, enabling fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It generates clear lines to 0.06 mm. This makes it an outstanding selection for nearly all inscribing tasks. Its style is secure and also reliable. It is ideal for small companies and also hobbyists.
It can inscribe various kinds of steel as well as timber. It has the capability to cut 8 to tenmm plywood in one pass. It additionally has the ability to reduce natural leather and also polymer.
It includes a number of accessories. You can get the bundle pack that includes the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can likewise get a 1064nm laser head. This head lowers burn marks in plastic and is especially valuable for delicate precious jewelry layouts. It additionally has a motion sensing unit as well as fire detection sensor.
It likewise includes an emergency situation stop button. It can be regulated with Wi-fi and also can import laser styles from free vector websites like Etsy. You can additionally control it via the Makeblock XTool D1 application on Android and also iOS.
It has a very good emphasis device. The laser crosshairs move as required as well as move to the frame of the art work. This makes the inscribing extremely specific. It can likewise be made use of to create a thickening result, which can be valuable when inscribing big items.
The XTool D1 Pro has boosted functions and laser power. It uses a 20W laser component to develop a beam of light that cuts items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher speed. It can reach etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this machine is very clever. Alongside the laser component, there is a pivoting arm which you pull out when you wish to focus the laser. It guarantees that you go down the directly the appropriate distance from the material. After that you tighten up the thumb screw and swivel the arm back up. Cnc Laser Cutting Machine Supplier
XTool D1 Special Features
Below are some of the leading Special Functions of the XTool D1:
Wireless Connection
Device can be connected using USB or a WiFi. As well as you can likewise control with a smartphone application on Android or iOS.
Cutting as well as Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is also a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft and also it is the recommended timber for all laser cutters.
I would stay clear of some plastics like PVC as well as vinyl given that it launches hydrogen chloride gas while being reduced. This gas is harmful and also really destructive (your device will corrosion promptly).
We have checked the device with inscription and also reducing various products. You will certainly find the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other machines. This should enable more accuracy and less mechanical wobble when inscribing at high speeds. Cnc Laser Cutting Machine Supplier
Advanced Stepper Motor Drivers
The equipment has a really innovative controller board. It has Trinamic stepper motor vehicle drivers which drive the motors with a pure sine wave. This way the motors are really accurate and silent. The vehicle drivers also sustain homing treatment without making use of restriction switches over as the motorists gauge present through electric motors and find the limit in this manner. This is why this maker does not need physical restriction switches over for homing.
The maker has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis rather than needing to separate one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver device instantly quits if an unintentional touch takes place. This is great for people that are concerned regarding safety and security. The device is also suitable with Windows and also Mac OS systems.
The XTool D1 software application is extremely easy to use. Once you have the art work prepared, you can use the application to establish the laser. You can also customize the laser setups and also develop custom-made art work. The application additionally includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can engrave over 100 products. The laser engraver tool is easy to use and features a protective cover. The equipment has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is a very flexible inscribing device. It cam be made use of to etch on all types of products/.
Below is a listing of products and also functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out device. Accurate, rapid as well as solidly constructed. It comes at a costs rate, but it deserves it for someone that desires a great as well as practically a commercial grade table top laser engraver efficient in quick cutting and specific engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription and cutting machine on our list is XTool D1 pro, the best alternative to Glowforge. It is in top place because it has received the Red Dot Design 2022 Honor. The outstanding style as well as cutting edge innovation set this equipment besides other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce as well as etch a huge variety of products, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription as well as reducing machine that works with a variety of products, including various types of wood. Its effective and extremely concentrated laser can quickly cut and also etched wood with best precision as well as accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is particularly produced metal as well as plastic inscription. It can etch different steels, consisting of aluminum as well as precious metals. It can likewise do colored etching on numerous steels, consisting of aluminum.
Cnc Laser Cutting Machine Supplier Cnc Laser Cutting Machine Supplier