What is the Makeblock XTool D1? K40 Laser Cutting Nylon
XTool D1 is a laser cutter that has actually been developed by Makeblock. K40 Laser Cutting Nylon
The company was developed in 2012 by Jasen Wang, who researched airplane layout at Northwestern Polytechnic University. The business is dedicated to developing innovative items to aid people express themselves with creation. Considering that its creation, Makeblock has actually launched a number of educational robotics, in addition to a coding system for children. It also launched the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that is capable of cutting and also engraving a variety of products. Its laser can remove detailed shapes much faster than a scroll saw or jigsaw, and also can be utilized for various projects. Along with engraving, the D1 can additionally be used for other tasks, consisting of creating jewelry and lamp shades.
The D1 is a DIY package that can be set up in only about half a hr. Its unit is collapsible, enabling very easy transportability as well as reliable air flow. It is likewise made from flame-retardant polyester, making it secure from dust bits. The unit also protects the functioning surface area under the equipment.
The XTool D1 is outfitted with a laser component that can engrave on steels as well as many various other products. It has actually an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer engraving and also higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it feasible to inscribe on a wide range of products. The D1 likewise has an integrated smart device application that can be downloaded and install from the Android Store or the Apple Application Store. The application can be made use of to import laser designs from totally free vector websites, consisting of Etsy. The D1 can also be attached to a computer via USB or WiFi. It can likewise move data via Wi-Fi or a large capability TF card.
The D1 can etching on Poplar plywood, which is one of one of the most commonly made use of woods for laser cutters. The D1 can also cut on other timbers, consisting of hard maple, walnut, and rosewood. Its laser head is flexible, enabling a 50mm variety. It can also refine materials approximately 10mm thick, which implies that it has the ability to etch on a variety of products. The D1 is developed for both residence as well as organization usage.
The XTool D1 comes in 2 models: the 20W variation as well as the 5W design. The 20W variation has a larger laser head, and also a smaller sized working location. The 5W design has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster equipment. K40 Laser Cutting Nylon
The D1 includes a steel framework, which provides optimum stability and sturdiness. It also has a simultaneous belt to enhance activity precision. The belt’s modest tension is needed for precision, particularly when moving at broadband. The synchronous belt can also help the machine keep steady and also lessen vibration. It can additionally eliminate the activity gap, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It produces clear lines to 0.06 mm. This makes it an outstanding selection for nearly all etching tasks. Its style is risk-free as well as trustworthy. It is perfect for small businesses and also enthusiasts.
It can inscribe different kinds of steel and wood. It has the capability to reduce eight to tenmm plywood in one pass. It additionally has the ability to reduce natural leather and acrylic.
It comes with a number of accessories. You can buy the package pack that includes the Air Assist Set as well as Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can additionally get a 1064nm laser head. This head lowers burn marks in plastic and is especially helpful for delicate fashion jewelry designs. It likewise has a motion sensing unit as well as flame discovery sensing unit.
It also includes an emergency situation quit button. It can be regulated via WiFi and also can import laser styles from free vector websites like Etsy. You can additionally control it using the Makeblock XTool D1 application on Android and iOS.
It has a very good emphasis system. The laser crosshairs relocate as required and also transfer to the framework of the artwork. This makes the etching very exact. It can likewise be utilized to create a thickening impact, which can be helpful when inscribing big products.
The XTool D1 Pro has actually enhanced attributes as well as laser power. It makes use of a 20W laser module to create a beam that reduces things in one pass. It can cut through 8mm black acrylic and 10mm basswood. It also has a higher speed. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this device is very smart. Beside the laser component, there is a pivoting arm which you take out when you want to focus the laser. It guarantees that you drop the directly the proper distance from the material. Then you tighten up the thumb screw and swivel the arm back up. K40 Laser Cutting Nylon
XTool D1 Special Features
Below are a few of the leading Special Features of the XTool D1:
Wireless Connectivity
Equipment can be connected using USB or a WiFi. And you can additionally regulate with a smart device application on Android or iphone.
Cutting and Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The machine can reduce wood, specifically Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would stay clear of some plastics like PVC as well as vinyl because it launches hydrogen chloride gas while being reduced. This gas is hazardous and also extremely corrosive (your machine will certainly rust quickly).
We have actually examined the maker with inscription and also reducing various materials. You will locate the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other makers. This must permit even more accuracy and also much less mechanical wobble when etching at broadband. K40 Laser Cutting Nylon
Advanced Stepper Motor Drivers
The equipment has a very innovative controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. In this manner the motors are really specific as well as silent. The chauffeurs additionally support homing treatment without using limit switches over as the chauffeurs determine present via electric motors and also detect the limit this way. This is why this device does not require physical limitation switches for homing.
The machine has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to detach one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device instantly quits if an accidental touch takes place. This is excellent for individuals that are worried concerning safety and security. The tool is likewise suitable with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. As soon as you have the art work prepared, you can use the application to set up the laser. You can likewise tailor the laser settings as well as produce customized art work. The app also includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can engrave over 100 materials. The laser engraver device is easy to use and features a safety cover. The device has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely flexible inscribing machine. It cam be used to engrave on all types of products/.
Right here is a listing of materials and also features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out equipment. Precise, quick and also solidly constructed. It comes with a costs price, but it deserves it for somebody that desires a great as well as practically an industrial grade table leading laser engraver with the ability of rapid cutting and also accurate inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription as well as reducing machine on our checklist is XTool D1 pro, the very best choice to Glowforge. It is in starting point since it has actually gotten the Red Dot Style 2022 Award. The exceptional design and also cutting edge innovation set this equipment in addition to various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, as well as XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce as well as engrave a massive variety of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription as well as reducing device that works with a wide range of products, including different sorts of wood. Its effective and extremely focused laser can conveniently cut and also etched timber with utmost accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is especially made for steel and plastic inscription. It can engrave different metals, consisting of aluminum and also precious metals. It can likewise do colored engraving on different steels, including aluminum.