What is the Makeblock XTool D1? Laser Engraving Machine For Jewelry
XTool D1 is a laser cutter that has actually been produced by Makeblock. Laser Engraving Machine For Jewelry
The firm was established in 2012 by Jasen Wang, that studied aircraft style at Northwestern Polytechnic University. The firm is dedicated to developing cutting-edge items to help individuals reveal themselves via development. Given that its creation, Makeblock has actually launched several academic robotics, as well as a coding system for children. It additionally launched the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting and also inscribing a selection of products. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, as well as can be used for various tasks. Along with inscription, the D1 can also be used for other jobs, consisting of developing jewelry as well as lamp tones.
The D1 is a do it yourself package that can be set up in just about half a hr. Its enclosure is foldable, enabling very easy transportability as well as efficient ventilation. It is likewise constructed from flame-retardant polyester, making it secure from dust bits. The enclosure also protects the working surface area under the device.
The XTool D1 is furnished with a laser component that can engrave on metals as well as lots of various other products. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription and also greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to engrave on a wide variety of materials. The D1 likewise has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be made use of to import laser styles from free vector websites, including Etsy. The D1 can likewise be connected to a computer system using USB or WiFi. It can also transfer information using Wi-Fi or a big ability TF card.
The D1 can inscribing on Poplar plywood, which is among the most frequently used timbers for laser cutters. The D1 can also reduce on other timbers, consisting of hard maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm array. It can likewise refine products as much as 10mm thick, which suggests that it is able to etch on a wide range of materials. The D1 is made for both house as well as service use.
The XTool D1 is available in 2 designs: the 20W variation and also the 5W design. The 20W variation has a bigger laser head, as well as a smaller sized working area. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster device. Laser Engraving Machine For Jewelry
The D1 features a steel frame, which provides maximum stability and sturdiness. It likewise has a simultaneous belt to improve motion accuracy. The belt’s modest stress is required for precision, especially when relocating at broadband. The synchronous belt can also assist the device keep secure as well as decrease vibration. It can likewise eliminate the motion space, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It generates clear lines to 0.06 mm. This makes it an outstanding option for mostly all etching jobs. Its design is secure and also reliable. It is perfect for small businesses and enthusiasts.
It can inscribe various sorts of metal and also timber. It has the ability to reduce 8 to tenmm plywood in one pass. It likewise has the capability to reduce leather and polymer.
It comes with a variety of accessories. You can buy the package pack that includes the Air Assist Establish and also Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can likewise obtain a 1064nm laser head. This head reduces melt marks in plastic and also is particularly useful for delicate precious jewelry layouts. It also has a movement sensor and also fire detection sensing unit.
It additionally features an emergency quit switch. It can be controlled through Wi-fi and can import laser styles from totally free vector websites like Etsy. You can also control it through the Makeblock XTool D1 app on Android as well as iOS.
It has a great focus system. The laser crosshairs move as needed and transfer to the frame of the art work. This makes the engraving extremely exact. It can likewise be utilized to produce a thickening effect, which can be useful when inscribing large things.
The XTool D1 Pro has actually improved functions and also laser power. It utilizes a 20W laser component to develop a light beam that cuts things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this maker is very brilliant. Next to the laser module, there is a rotating arm which you take out when you intend to focus the laser. It assures that you go down the head on the proper range from the material. Then you tighten up the thumb screw and rotate the arm back up. Laser Engraving Machine For Jewelry
XTool D1 Special Features
Below are some of the leading Special Attributes of the XTool D1:
Wireless Connection
Maker can be linked through USB or a WiFi. And also you can additionally regulate with a mobile phone application on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a very qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The equipment can reduce wood, especially Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would prevent some plastics like PVC and also vinyl since it launches hydrogen chloride gas while being cut. This gas is poisonous and also very corrosive (your machine will certainly corrosion quickly).
We have tested the equipment with engraving and also reducing various products. You will certainly locate the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other devices. This must allow for more accuracy and less mechanical wobble when etching at broadband. Laser Engraving Machine For Jewelry
Advanced Stepper Electric Motor Drivers
The maker has a really innovative controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. This way the electric motors are extremely specific and also quiet. The vehicle drivers additionally sustain homing treatment without making use of restriction switches as the vehicle drivers measure current via motors as well as discover the limit in this manner. This is why this device does not need physical limit switches for homing.
The machine has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis rather than having to separate among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver tool immediately stops if an unintended touch takes place. This is great for people who are concerned concerning safety. The device is also compatible with Windows and also Mac OS systems.
The XTool D1 software is extremely easy to use. When you have actually the art work prepared, you can use the application to establish the laser. You can likewise tailor the laser setups and also develop personalized art work. The application also consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can inscribe over 100 materials. The laser engraver tool is easy to use as well as features a protective cover. The machine has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very versatile engraving device. It cam be made use of to etch on all kinds of materials/.
Below is a checklist of products as well as features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered machine. Specific, fast and also solidly built. It comes with a costs cost, yet it deserves it for someone that desires an excellent and almost a commercial grade table top laser engraver capable of quick cutting and exact inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and also cutting device on our listing is XTool D1 pro, the best option to Glowforge. It is in top place due to the fact that it has actually obtained the Red Dot Style 2022 Award. The impressive layout as well as cutting edge modern technology set this maker in addition to various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and also engrave a big selection of products, from something as slim as cells paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser engraving as well as reducing maker that works with a wide variety of products, consisting of different types of timber. Its effective and very focused laser can conveniently cut and etched wood with utmost accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is specifically produced metal as well as plastic inscription. It can inscribe different steels, including aluminum and also precious metals. It can also do tinted engraving on different metals, including aluminum.
Laser Engraving Machine For Jewelry Laser Engraving Machine For Jewelry