What is the Makeblock XTool D1? Oem Laser Foam Cutting Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Oem Laser Foam Cutting Machine
The firm was established in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic University. The company is devoted to creating innovative products to assist individuals reveal themselves via development. Because its creation, Makeblock has launched a number of educational robotics, in addition to a coding platform for children. It also released the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can cutting as well as etching a variety of products. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, and can be utilized for various projects. In addition to engraving, the D1 can also be made use of for various other jobs, including creating jewelry and also lamp tones.
The D1 is a DIY set that can be assembled in just about half an hour. Its room is foldable, allowing for easy mobility and effective ventilation. It is likewise made of flame-retardant polyester, making it risk-free from dirt bits. The enclosure additionally shields the working surface under the maker.
The XTool D1 is outfitted with a laser component that is capable of engrave on metals as well as several other products. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This permits finer inscription and higher precision.
The D1 also has a high resolution of 1000 DPI, which makes it possible to inscribe on a wide range of materials. The D1 likewise has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple Application Store. The app can be made use of to import laser styles from complimentary vector sites, consisting of Etsy. The D1 can also be connected to a computer by means of USB or WiFi. It can likewise transfer data by means of Wi-Fi or a huge ability TF card.
The D1 is capable of etching on Poplar plywood, which is among the most typically made use of timbers for laser cutters. The D1 can additionally cut on various other timbers, including difficult maple, walnut, and rosewood. Its laser head is adjustable, permitting a 50mm range. It can also refine products approximately 10mm thick, which means that it is able to engrave on a wide array of products. The D1 is made for both house as well as organization use.
The XTool D1 can be found in two models: the 20W variation as well as the 5W model. The 20W version has a larger laser head, and a smaller sized working area. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker equipment. Oem Laser Foam Cutting Machine
The D1 includes a steel frame, which supplies optimum stability as well as durability. It also has a synchronous belt to improve activity accuracy. The belt’s modest stress is needed for accuracy, particularly when moving at high speeds. The concurrent belt can likewise assist the device stay steady and also lessen resonance. It can additionally get rid of the activity space, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an outstanding choice for almost all etching tasks. Its style is risk-free and reputable. It is optimal for small companies and hobbyists.
It can engrave various types of steel and also wood. It has the capability to cut eight to tenmm plywood in one pass. It likewise has the ability to reduce leather and also acrylic.
It features a variety of devices. You can get the bundle pack that consists of the Air Help Establish as well as Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can additionally get a 1064nm laser head. This head lowers burn marks in plastic as well as is specifically valuable for delicate fashion jewelry styles. It additionally has an activity sensing unit and fire detection sensing unit.
It likewise features an emergency quit switch. It can be controlled with Wi-fi and can import laser styles from free vector websites like Etsy. You can likewise control it through the Makeblock XTool D1 app on Android and iOS.
It has a very good focus device. The laser crosshairs relocate as required and also relocate to the frame of the artwork. This makes the engraving really specific. It can also be made use of to produce a thickening impact, which can be valuable when inscribing huge products.
The XTool D1 Pro has improved attributes and laser power. It uses a 20W laser component to produce a beam that reduces items in one pass. It can cut through 8mm black acrylic and 10mm basswood. It likewise has a higher rate. It can reach etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this machine is really clever. Alongside the laser component, there is a swivelling arm which you pull out when you intend to focus the laser. It ensures that you drop the head on the correct range from the product. Then you tighten up the thumb screw and also pivot the arm back up. Oem Laser Foam Cutting Machine
XTool D1 Special Features
Right here are a few of the top Unique Features of the XTool D1:
Wireless Connectivity
Equipment can be attached using USB or a Wi-fi. As well as you can likewise control with a smart device app on Android or iOS.
Cutting and Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The maker can reduce wood, particularly Poplar plywood which is soft as well as it is the favored timber for all laser cutters.
I would certainly avoid some plastics like PVC and vinyl since it launches hydrogen chloride gas while being reduced. This gas is hazardous and very corrosive (your equipment will certainly rust rapidly).
We have actually examined the maker with inscription and cutting various materials. You will certainly locate the results of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other makers. This must permit even more precision and less mechanical wobble when engraving at broadband. Oem Laser Foam Cutting Machine
Advanced Stepper Motor Drivers
The equipment has a really innovative controller board. It has Trinamic stepper electric motor drivers which drive the electric motors with a pure sine wave. In this manner the electric motors are really precise as well as quiet. The drivers likewise support homing procedure without utilizing restriction switches over as the drivers determine existing through electric motors and find the limit in this manner. This is why this machine does not need physical limit switches for homing.
The machine has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis rather than having to separate among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device automatically stops if an accidental touch takes place. This is great for people who are worried about safety. The tool is likewise compatible with Windows and Mac OS systems.
The XTool D1 software program is really easy to use. When you have actually the artwork prepared, you can make use of the application to establish the laser. You can also tailor the laser setups and also develop customized artwork. The app likewise consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can etch over 100 materials. The laser engraver tool is easy to use as well as comes with a safety cover. The maker has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely functional engraving maker. It cam be made use of to etch on all sorts of products/.
Right here is a list of materials and also attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out maker. Precise, rapid as well as well built. It comes with a costs price, yet it deserves it for someone that wants a good and also practically an industrial grade table top laser engraver efficient in fast cutting as well as accurate engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as cutting machine on our checklist is XTool D1 pro, the most effective alternative to Glowforge. It is in top place since it has obtained the Red Dot Layout 2022 Honor. The exceptional layout as well as modern modern technology established this device in addition to other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and etch a huge selection of products, from something as slim as cells paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser engraving and also cutting maker that is compatible with a wide variety of materials, consisting of various sorts of wood. Its powerful as well as very focused laser can quickly reduce and also engraved wood with best accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is especially produced metal and plastic engraving. It can etch different metals, including aluminum and precious metals. It can likewise do colored engraving on numerous metals, including light weight aluminum.
Oem Laser Foam Cutting Machine Oem Laser Foam Cutting Machine