What is the Makeblock XTool D1? Pcb Uv Laser Cutting Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Pcb Uv Laser Cutting Machine
The company was developed in 2012 by Jasen Wang, that studied airplane style at Northwestern Polytechnic University. The company is devoted to producing cutting-edge products to assist people reveal themselves via production. Since its development, Makeblock has actually released a number of academic robots, along with a coding system for kids. It additionally introduced the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting as well as inscribing a selection of products. Its laser can cut out elaborate shapes much faster than a scroll saw or jigsaw, as well as can be used for various jobs. Along with inscription, the D1 can also be utilized for other projects, consisting of creating jewelry and also lamp shades.
The D1 is a do it yourself set that can be constructed in only about half a hr. Its unit is foldable, enabling very easy transportability and effective air flow. It is also made of flame-retardant polyester, making it safe from dust bits. The room likewise safeguards the functioning surface under the maker.
The XTool D1 is geared up with a laser module that can engrave on steels and also several various other products. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This enables finer engraving and higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to etch on a vast array of products. The D1 additionally has an integrated smart device application that can be downloaded and install from the Android Store or the Apple Application Store. The app can be made use of to import laser designs from complimentary vector websites, including Etsy. The D1 can likewise be attached to a computer through USB or WiFi. It can also transfer information by means of Wi-Fi or a huge capability TF card.
The D1 can engraving on Poplar plywood, which is just one of the most typically made use of woods for laser cutters. The D1 can additionally cut on various other timbers, consisting of tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm range. It can also refine products approximately 10mm thick, which suggests that it has the ability to inscribe on a variety of products. The D1 is developed for both house as well as organization use.
The XTool D1 comes in two models: the 20W version and also the 5W version. The 20W version has a larger laser head, and a smaller working location. The 5W version has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster device. Pcb Uv Laser Cutting Machine
The D1 includes a steel framework, which gives maximum stability and resilience. It additionally has a synchronous belt to boost movement accuracy. The belt’s moderate tension is needed for accuracy, particularly when relocating at high speeds. The synchronous belt can also aid the equipment remain stable and minimize vibration. It can also remove the movement gap, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it an outstanding selection for almost all engraving jobs. Its design is safe as well as reliable. It is optimal for small businesses and also enthusiasts.
It can engrave different types of metal and wood. It has the capacity to cut 8 to tenmm plywood in one pass. It likewise has the capacity to cut natural leather and also acrylic.
It includes a variety of devices. You can purchase the package pack that includes the Air Assist Set as well as Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise get a 1064nm laser head. This head lowers melt marks in plastic as well as is particularly beneficial for fragile precious jewelry layouts. It additionally has a movement sensing unit and fire detection sensor.
It additionally features an emergency situation stop switch. It can be regulated with Wi-fi and also can import laser layouts from complimentary vector sites like Etsy. You can additionally regulate it through the Makeblock XTool D1 app on Android and iphone.
It has a great focus device. The laser crosshairs move as required and relocate to the frame of the art work. This makes the inscribing very specific. It can additionally be used to produce a thickening impact, which can be beneficial when engraving big things.
The XTool D1 Pro has actually improved features and also laser power. It makes use of a 20W laser component to produce a beam that cuts objects in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It additionally has a greater speed. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is extremely brilliant. Beside the laser component, there is a pivoting arm which you pull out when you intend to concentrate the laser. It guarantees that you go down the head on the right range from the material. Then you tighten up the thumb screw and rotate the arm back up. Pcb Uv Laser Cutting Machine
XTool D1 Special Features
Here are several of the top Unique Functions of the XTool D1:
Wireless Connectivity
Device can be attached by means of USB or a Wi-fi. And also you can additionally manage with a smartphone app on Android or iOS.
Trimming and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft and also it is the preferred wood for all laser cutters.
I would certainly prevent some plastics like PVC as well as vinyl because it launches hydrogen chloride gas while being reduced. This gas is poisonous and extremely corrosive (your equipment will certainly corrosion promptly).
We have actually examined the machine with inscription and reducing different products. You will certainly locate the results of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other machines. This need to allow for more accuracy and much less mechanical wobble when inscribing at broadband. Pcb Uv Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The maker has an extremely innovative controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. In this manner the electric motors are extremely precise and quiet. The drivers additionally support homing procedure without making use of limit switches over as the chauffeurs determine present through electric motors and also find the limit by doing this. This is why this equipment does not need physical limit switches for homing.
The maker has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to separate one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver device instantly stops if an unintended touch happens. This is excellent for people who are concerned about security. The device is additionally compatible with Windows and Mac OS systems.
The XTool D1 software is very easy to use. Once you have the art work prepared, you can make use of the app to set up the laser. You can additionally personalize the laser setups and also create customized art work. The application likewise includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can engrave over 100 materials. The laser engraver device is easy to use and comes with a protective cover. The maker has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very functional engraving machine. It cam be made use of to etch on all kinds of products/.
Below is a list of products and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered machine. Accurate, fast and also solidly developed. It comes with a premium rate, however it deserves it for someone that desires a good and virtually an industrial grade table top laser engraver capable of quick cutting and also precise engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and reducing machine on our listing is XTool D1 pro, the very best alternative to Glowforge. It is in starting point since it has actually received the Red Dot Design 2022 Honor. The impressive style and also cutting edge technology established this machine in addition to other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and etch a substantial range of products, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving as well as cutting equipment that is compatible with a wide variety of products, including various types of wood. Its effective and highly focused laser can quickly cut as well as inscribed wood with ultimate precision and accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is particularly produced metal and also plastic engraving. It can etch different steels, consisting of light weight aluminum and also precious metals. It can likewise do tinted etching on numerous metals, consisting of aluminum.