What is the Makeblock XTool D1? Production Laser Cutting Machine
XTool D1 is a laser cutter that has actually been developed by Makeblock. Production Laser Cutting Machine
The company was established in 2012 by Jasen Wang, that researched aircraft design at Northwestern Polytechnic University. The business is dedicated to developing ingenious products to aid individuals share themselves via creation. Considering that its creation, Makeblock has actually launched a number of academic robots, along with a coding system for children. It also launched the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can cutting and etching a selection of products. Its laser can remove elaborate shapes much faster than a scroll saw or jigsaw, and can be utilized for many different projects. In addition to engraving, the D1 can additionally be used for various other tasks, including producing precious jewelry as well as lamp tones.
The D1 is a DIY kit that can be constructed in only regarding half a hr. Its room is foldable, allowing for simple portability as well as effective air flow. It is additionally constructed from flame-retardant polyester, making it safe from dust fragments. The enclosure likewise shields the functioning surface under the machine.
The XTool D1 is geared up with a laser component that can engrave on steels and also numerous various other materials. It has actually an ultra-fine pressed laser area of 0.08 x 0.08 mm. This permits finer engraving as well as greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to inscribe on a variety of materials. The D1 likewise has a built-in smart device application that can be downloaded from the Android Shop or the Apple App Store. The app can be used to import laser layouts from totally free vector websites, including Etsy. The D1 can likewise be attached to a computer system through USB or WiFi. It can additionally move data by means of Wi-Fi or a big capability TF card.
The D1 can inscribing on Poplar plywood, which is one of one of the most typically used timbers for laser cutters. The D1 can likewise cut on other woods, including tough maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm range. It can also refine products approximately 10mm thick, which means that it is able to inscribe on a wide range of materials. The D1 is made for both residence as well as organization use.
The XTool D1 can be found in 2 models: the 20W variation and also the 5W model. The 20W variation has a bigger laser head, and also a smaller working location. The 5W version has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster machine. Production Laser Cutting Machine
The D1 includes a steel structure, which offers maximum security and toughness. It also has a simultaneous belt to improve motion accuracy. The belt’s modest tension is required for accuracy, especially when moving at broadband. The concurrent belt can likewise help the equipment remain secure and also decrease vibration. It can additionally eliminate the motion void, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an outstanding choice for almost all engraving tasks. Its layout is secure and also dependable. It is optimal for small companies as well as enthusiasts.
It can etch various sorts of metal and also timber. It has the capability to reduce 8 to tenmm plywood in one pass. It also has the capability to reduce natural leather and also polymer.
It includes a number of devices. You can buy the package pack that includes the Air Assist Establish and also Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can likewise obtain a 1064nm laser head. This head lowers burn marks in plastic and is specifically useful for delicate fashion jewelry styles. It likewise has an activity sensing unit and also flame discovery sensing unit.
It additionally includes an emergency quit switch. It can be controlled through Wi-fi and also can import laser designs from totally free vector sites like Etsy. You can likewise control it by means of the Makeblock XTool D1 app on Android as well as iOS.
It has a great focus system. The laser crosshairs relocate as required and also relocate to the structure of the art work. This makes the engraving extremely specific. It can additionally be made use of to create a thickening result, which can be valuable when inscribing large things.
The XTool D1 Pro has actually improved functions and laser power. It uses a 20W laser component to create a light beam that reduces items in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It likewise has a greater speed. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is very smart. Next to the laser module, there is a rotating arm which you take out when you wish to concentrate the laser. It assures that you drop the head on the right distance from the product. Then you tighten up the thumb screw as well as rotate the arm back up. Production Laser Cutting Machine
XTool D1 Special Features
Below are a few of the top Special Features of the XTool D1:
Wireless Connectivity
Machine can be linked using USB or a Wi-fi. And also you can additionally control with a mobile phone application on Android or iphone.
Trimming as well as Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The machine can cut timber, especially Poplar plywood which is soft and also it is the preferred wood for all laser cutters.
I would stay clear of some plastics like PVC and also vinyl given that it launches hydrogen chloride gas while being reduced. This gas is hazardous and extremely corrosive (your machine will certainly rust rapidly).
We have actually checked the equipment with engraving and reducing different products. You will certainly discover the outcomes of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other machines. This must permit even more accuracy as well as much less mechanical wobble when inscribing at broadband. Production Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The equipment has an extremely sophisticated controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. By doing this the electric motors are very specific and quiet. The drivers additionally sustain homing treatment without using limit switches as the drivers determine current through electric motors and spot the limit this way. This is why this machine does not require physical limitation switches over for homing.
The device has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to separate among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed via Wi-Fi or USB. The laser engraver tool automatically quits if an accidental touch takes place. This is excellent for individuals that are worried about safety and security. The device is also compatible with Windows and Mac OS systems.
The XTool D1 software is very easy to use. Once you have actually the artwork prepared, you can make use of the application to set up the laser. You can also tailor the laser settings and produce custom-made artwork. The app also consists of a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can engrave over 100 products. The laser engraver tool is easy to use and features a protective cover. The equipment has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is a really flexible engraving equipment. It cam be made use of to engrave on all sorts of products/.
Below is a list of products as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out equipment. Precise, rapid and also solidly developed. It comes with a costs rate, but it is worth it for someone that desires a good and almost a commercial grade table top laser engraver capable of fast cutting and specific engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and reducing equipment on our list is XTool D1 pro, the very best choice to Glowforge. It remains in starting point since it has actually received the Red Dot Layout 2022 Award. The superior style and cutting edge technology set this device besides various other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, as well as XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce and also engrave a significant variety of products, from something as slim as cells paper to something as thick as leather and timber panels.
XTool D1 is a diode laser engraving as well as cutting device that works with a vast array of materials, consisting of various kinds of timber. Its effective and very concentrated laser can quickly reduce as well as etched wood with supreme accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is specifically made for steel and plastic inscription. It can etch different metals, including aluminum as well as rare-earth elements. It can likewise do colored etching on various steels, including light weight aluminum.
Production Laser Cutting Machine Production Laser Cutting Machine