What is the Makeblock XTool D1? Single Flatform Fiber Laser Cutting Machine Factory
XTool D1 is a laser cutter that has actually been created by Makeblock. Single Flatform Fiber Laser Cutting Machine Factory
The firm was established in 2012 by Jasen Wang, who studied aircraft design at Northwestern Polytechnic College. The company is committed to developing ingenious items to help individuals express themselves via production. Since its development, Makeblock has actually released a number of academic robotics, as well as a coding platform for youngsters. It additionally released the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of cutting and etching a selection of products. Its laser can eliminate elaborate forms much faster than a scroll saw or jigsaw, and can be used for several tasks. In addition to engraving, the D1 can likewise be utilized for various other projects, including producing precious jewelry as well as light tones.
The D1 is a DIY package that can be assembled in only regarding half a hr. Its room is foldable, permitting easy portability as well as reliable air flow. It is likewise made from flame-retardant polyester, making it risk-free from dirt bits. The room additionally shields the functioning surface under the maker.
The XTool D1 is geared up with a laser component that is capable of engrave on steels as well as numerous various other materials. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer engraving and greater precision.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to engrave on a large range of materials. The D1 also has an integrated mobile phone application that can be downloaded from the Android Store or the Apple Application Shop. The app can be used to import laser layouts from cost-free vector sites, consisting of Etsy. The D1 can additionally be connected to a computer system by means of USB or WiFi. It can additionally move data using Wi-Fi or a big capacity TF card.
The D1 can engraving on Poplar plywood, which is just one of one of the most commonly made use of timbers for laser cutters. The D1 can likewise reduce on other woods, including difficult maple, walnut, and also rosewood. Its laser head is adjustable, allowing for a 50mm array. It can likewise refine products up to 10mm thick, which implies that it has the ability to inscribe on a variety of materials. The D1 is created for both residence as well as service use.
The XTool D1 comes in 2 designs: the 20W version and also the 5W version. The 20W version has a larger laser head, and also a smaller sized working area. The 5W version has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a much faster equipment. Single Flatform Fiber Laser Cutting Machine Factory
The D1 includes a steel structure, which offers maximum stability and also sturdiness. It also has a simultaneous belt to improve motion accuracy. The belt’s moderate tension is required for accuracy, particularly when relocating at broadband. The synchronous belt can additionally aid the equipment stay secure as well as reduce resonance. It can also remove the activity void, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an outstanding selection for almost all etching jobs. Its style is risk-free as well as trustworthy. It is ideal for local business and also enthusiasts.
It can etch different types of steel as well as wood. It has the capacity to reduce 8 to tenmm plywood in one pass. It additionally has the ability to cut natural leather as well as polymer.
It includes a number of accessories. You can buy the bundle pack that consists of the Air Help Set and Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can also obtain a 1064nm laser head. This head lowers melt marks in plastic and also is especially useful for delicate jewelry styles. It likewise has an activity sensor and flame discovery sensor.
It also features an emergency situation quit switch. It can be managed through Wi-fi and also can import laser layouts from complimentary vector websites like Etsy. You can likewise control it using the Makeblock XTool D1 app on Android as well as iOS.
It has a great focus system. The laser crosshairs move as needed and also transfer to the framework of the artwork. This makes the inscribing very exact. It can also be used to produce a thickening result, which can be useful when etching large items.
The XTool D1 Pro has improved functions and also laser power. It utilizes a 20W laser module to produce a light beam that cuts things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It additionally has a higher speed. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is really clever. Alongside the laser component, there is a rotating arm which you take out when you wish to concentrate the laser. It guarantees that you go down the head on the proper distance from the material. After that you tighten the thumb screw and also swivel the arm back up. Single Flatform Fiber Laser Cutting Machine Factory
XTool D1 Special Features
Below are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Equipment can be attached via USB or a Wi-fi. And also you can additionally control with a mobile phone app on Android or iOS.
Trimming and also Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The device can cut wood, specifically Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would avoid some plastics like PVC and plastic since it releases hydrogen chloride gas while being reduced. This gas is toxic and really destructive (your maker will corrosion rapidly).
We have checked the maker with inscription and also cutting different products. You will certainly locate the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other machines. This need to enable even more precision as well as much less mechanical wobble when etching at high speeds. Single Flatform Fiber Laser Cutting Machine Factory
Advanced Stepper Motor Drivers
The equipment has a very sophisticated controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. In this manner the electric motors are really exact and quiet. The motorists likewise support homing treatment without making use of restriction changes as the drivers determine current through motors as well as identify the limit by doing this. This is why this maker does not need physical limitation changes for homing.
The maker has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis instead of having to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver tool instantly stops if an unexpected touch occurs. This is terrific for individuals that are concerned concerning safety and security. The device is likewise compatible with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. When you have actually the art work prepared, you can make use of the app to set up the laser. You can additionally customize the laser settings as well as develop custom-made artwork. The application likewise consists of a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can etch over 100 products. The laser engraver tool is easy to use as well as comes with a safety cover. The machine has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is a very functional etching device. It cam be used to etch on all sorts of materials/.
Right here is a listing of products as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out maker. Accurate, quick as well as solidly constructed. It comes at a costs rate, yet it deserves it for somebody that wants an excellent and also virtually a commercial quality table top laser engraver capable of quick cutting and precise engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser inscription as well as cutting equipment on our list is XTool D1 pro, the most effective alternative to Glowforge. It is in top place due to the fact that it has gotten the Red Dot Layout 2022 Award. The outstanding style as well as modern modern technology set this device apart from various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a significant variety of products, from something as slim as cells paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser engraving and also cutting device that is compatible with a wide variety of materials, including various types of timber. Its powerful and also highly concentrated laser can easily cut as well as engraved timber with ultimate precision and also precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is specifically made for steel as well as plastic inscription. It can etch various metals, consisting of light weight aluminum as well as rare-earth elements. It can also do tinted engraving on numerous metals, including light weight aluminum.
Single Flatform Fiber Laser Cutting Machine Factory Single Flatform Fiber Laser Cutting Machine Factory