What is the Makeblock XTool D1? Steel Cutting Cnc Laser Machine
XTool D1 is a laser cutter that has actually been developed by Makeblock. Steel Cutting Cnc Laser Machine
The company was developed in 2012 by Jasen Wang, that studied aircraft design at Northwestern Polytechnic College. The company is dedicated to developing cutting-edge items to help people reveal themselves via creation. Considering that its development, Makeblock has released numerous instructional robotics, along with a coding system for youngsters. It likewise introduced the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can cutting and engraving a range of materials. Its laser can cut out complex shapes much faster than a scroll saw or jigsaw, and can be used for various projects. In addition to engraving, the D1 can likewise be utilized for various other projects, consisting of producing fashion jewelry as well as light shades.
The D1 is a DIY set that can be assembled in only about half a hr. Its unit is collapsible, allowing for easy mobility and efficient air flow. It is likewise constructed from flame-retardant polyester, making it risk-free from dust fragments. The room also protects the functioning surface under the machine.
The XTool D1 is outfitted with a laser component that is capable of engrave on metals and several other products. It has actually an ultra-fine pressed laser place of 0.08 x 0.08 mm. This enables finer inscription and higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to inscribe on a large range of materials. The D1 also has a built-in smartphone app that can be downloaded and install from the Android Shop or the Apple App Store. The app can be made use of to import laser designs from cost-free vector sites, including Etsy. The D1 can also be attached to a computer by means of USB or WiFi. It can additionally transfer data by means of Wi-Fi or a huge capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of the most commonly utilized timbers for laser cutters. The D1 can likewise cut on other timbers, consisting of difficult maple, walnut, and also rosewood. Its laser head is flexible, enabling a 50mm array. It can likewise process materials as much as 10mm thick, which suggests that it is able to inscribe on a wide array of products. The D1 is made for both residence and service usage.
The XTool D1 comes in two models: the 20W variation and the 5W design. The 20W version has a bigger laser head, and also a smaller working location. The 5W version has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a quicker machine. Steel Cutting Cnc Laser Machine
The D1 features a steel structure, which offers maximum security as well as longevity. It also has a concurrent belt to enhance motion accuracy. The belt’s moderate stress is required for accuracy, specifically when relocating at high speeds. The synchronous belt can additionally aid the maker keep secure as well as minimize resonance. It can also remove the movement gap, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an exceptional selection for nearly all engraving jobs. Its style is secure as well as dependable. It is optimal for small businesses and also enthusiasts.
It can etch various kinds of steel and wood. It has the ability to reduce 8 to tenmm plywood in one pass. It likewise has the capacity to cut natural leather and also polymer.
It includes a variety of accessories. You can get the bundle pack that consists of the Air Help Establish as well as Honeycomb Working Panel. It costs $119 and also $269, specifically. You can also get a 1064nm laser head. This head reduces melt marks in plastic and also is especially valuable for fragile jewelry designs. It also has a movement sensor and flame detection sensing unit.
It additionally features an emergency situation stop switch. It can be regulated with WiFi and can import laser designs from complimentary vector sites like Etsy. You can likewise control it using the Makeblock XTool D1 application on Android and also iphone.
It has a great emphasis device. The laser crosshairs relocate as needed and transfer to the framework of the artwork. This makes the inscribing really accurate. It can also be used to develop a thickening result, which can be useful when engraving large things.
The XTool D1 Pro has actually enhanced attributes and also laser power. It utilizes a 20W laser component to create a light beam that reduces items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a greater rate. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this equipment is extremely smart. Beside the laser module, there is a swivelling arm which you pull out when you wish to concentrate the laser. It guarantees that you go down the directly the right range from the material. After that you tighten up the thumb screw and also rotate the arm back up. Steel Cutting Cnc Laser Machine
XTool D1 Special Features
Right here are several of the top Special Features of the XTool D1:
Wireless Connectivity
Equipment can be attached via USB or a Wi-fi. And you can likewise manage with a smartphone app on Android or iOS.
Trimming and also Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The maker can reduce timber, especially Poplar plywood which is soft as well as it is the favored timber for all laser cutters.
I would avoid some plastics like PVC and plastic given that it releases hydrogen chloride gas while being reduced. This gas is harmful and also really corrosive (your maker will rust quickly).
We have checked the machine with engraving and cutting different materials. You will find the results of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all other makers. This should enable more accuracy and much less mechanical wobble when engraving at high speeds. Steel Cutting Cnc Laser Machine
Advanced Stepper Electric Motor Drivers
The device has an extremely innovative controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. By doing this the motors are extremely specific and also quiet. The chauffeurs additionally support homing treatment without utilizing limitation switches over as the chauffeurs measure existing via electric motors and also find the limit in this manner. This is why this equipment does not require physical limitation switches over for homing.
The machine has motorists for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool instantly quits if an unintentional touch occurs. This is fantastic for individuals that are concerned concerning safety. The tool is additionally compatible with Windows as well as Mac OS systems.
The XTool D1 software program is really easy to use. As soon as you have the artwork prepared, you can use the application to establish the laser. You can additionally personalize the laser settings as well as produce custom art work. The app additionally includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can inscribe over 100 materials. The laser engraver device is easy to use as well as features a safety cover. The machine has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely flexible inscribing equipment. It cam be used to inscribe on all sorts of products/.
Below is a listing of products as well as features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out machine. Accurate, quick and also well developed. It comes at a premium cost, yet it is worth it for a person that desires a good and almost a commercial quality table top laser engraver capable of rapid cutting as well as accurate engraving thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription and reducing device on our checklist is XTool D1 pro, the most effective option to Glowforge. It is in starting point because it has actually received the Red Dot Style 2022 Award. The exceptional design and state-of-the-art technology established this device aside from other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and inscribe a massive variety of materials, from something as slim as tissue paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser engraving and also reducing machine that is compatible with a wide variety of materials, consisting of various sorts of wood. Its powerful and very concentrated laser can conveniently reduce and also inscribed wood with utmost accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is especially made for metal and plastic inscription. It can etch numerous steels, including light weight aluminum and precious metals. It can also do colored inscribing on various steels, including light weight aluminum.
Steel Cutting Cnc Laser Machine Steel Cutting Cnc Laser Machine