What is the Makeblock XTool D1? Supply Small Fiber Laser Cutting Machine Pricelist
XTool D1 is a laser cutter that has actually been produced by Makeblock. Supply Small Fiber Laser Cutting Machine Pricelist
The company was developed in 2012 by Jasen Wang, who examined airplane layout at Northwestern Polytechnic University. The firm is committed to producing cutting-edge items to assist people share themselves through development. Since its development, Makeblock has actually launched several educational robotics, in addition to a coding system for children. It also released the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that is capable of reducing as well as inscribing a variety of materials. Its laser can cut out elaborate shapes much faster than a scroll saw or jigsaw, and also can be made use of for many different projects. Along with inscription, the D1 can also be made use of for various other projects, consisting of creating jewelry and also lamp shades.
The D1 is a DIY set that can be assembled in only concerning half a hr. Its unit is collapsible, enabling easy mobility as well as reliable air flow. It is likewise made from flame-retardant polyester, making it secure from dirt bits. The unit also secures the working surface under the equipment.
The XTool D1 is geared up with a laser component that can engrave on metals and also many various other products. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This permits finer inscription and higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to inscribe on a wide variety of materials. The D1 additionally has an integrated smartphone app that can be downloaded and install from the Android Shop or the Apple Application Shop. The application can be made use of to import laser layouts from cost-free vector websites, consisting of Etsy. The D1 can also be linked to a computer system using USB or WiFi. It can additionally transfer information by means of Wi-Fi or a large ability TF card.
The D1 can engraving on Poplar plywood, which is just one of one of the most generally used timbers for laser cutters. The D1 can also cut on various other timbers, consisting of hard maple, walnut, and also rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can also process products as much as 10mm thick, which implies that it has the ability to inscribe on a wide variety of materials. The D1 is made for both house as well as service usage.
The XTool D1 comes in 2 versions: the 20W version and the 5W version. The 20W version has a larger laser head, as well as a smaller sized working area. The 5W version has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a faster device. Supply Small Fiber Laser Cutting Machine Pricelist
The D1 includes a steel framework, which gives maximum stability and toughness. It also has a concurrent belt to boost activity accuracy. The belt’s moderate tension is required for precision, particularly when relocating at high speeds. The simultaneous belt can additionally assist the equipment remain steady and also minimize vibration. It can also get rid of the activity void, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it an exceptional choice for nearly all etching tasks. Its style is secure and also trustworthy. It is excellent for local business and also hobbyists.
It can etch different types of metal and wood. It has the capacity to cut eight to tenmm plywood in one pass. It additionally has the capability to cut leather and also polymer.
It includes a number of devices. You can purchase the package pack that consists of the Air Help Set and also Honeycomb Working Panel. It sets you back $119 and also $269, specifically. You can also get a 1064nm laser head. This head minimizes melt marks in plastic and also is especially helpful for fragile fashion jewelry designs. It likewise has a movement sensor and also fire detection sensing unit.
It likewise includes an emergency stop button. It can be controlled with WiFi and also can import laser designs from cost-free vector websites like Etsy. You can also control it via the Makeblock XTool D1 app on Android and also iphone.
It has a great focus system. The laser crosshairs move as needed and transfer to the framework of the artwork. This makes the inscribing extremely precise. It can additionally be made use of to produce a thickening impact, which can be beneficial when inscribing huge things.
The XTool D1 Pro has boosted functions as well as laser power. It makes use of a 20W laser module to produce a beam of light that reduces objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It additionally has a greater rate. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is really smart. Beside the laser component, there is a swivelling arm which you pull out when you intend to focus the laser. It assures that you go down the head on the appropriate range from the material. After that you tighten up the thumb screw as well as swivel the arm back up. Supply Small Fiber Laser Cutting Machine Pricelist
XTool D1 Special Features
Here are some of the leading Special Features of the XTool D1:
Wireless Connectivity
Device can be linked by means of USB or a WiFi. And you can additionally regulate with a mobile phone application on Android or iOS.
Cutting as well as Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The device can cut timber, specifically Poplar plywood which is soft and it is the recommended timber for all laser cutters.
I would avoid some plastics like PVC and vinyl given that it releases hydrogen chloride gas while being reduced. This gas is toxic and also really corrosive (your device will corrosion swiftly).
We have tested the machine with engraving and reducing various products. You will find the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other devices. This should allow for more precision as well as less mechanical wobble when etching at high speeds. Supply Small Fiber Laser Cutting Machine Pricelist
Advanced Stepper Motor Drivers
The device has a really sophisticated controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. In this manner the electric motors are extremely exact as well as quiet. The vehicle drivers also support homing treatment without utilizing restriction switches over as the chauffeurs determine current via electric motors as well as spot the limit by doing this. This is why this maker does not require physical limitation switches over for homing.
The equipment has motorists for 3 axis– so you can plug in the roller system as a Z axis instead of having to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver device immediately quits if an unintended touch takes place. This is terrific for people that are concerned concerning security. The tool is also suitable with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. When you have the art work prepared, you can use the application to set up the laser. You can likewise customize the laser setups and produce customized art work. The app likewise includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can engrave over 100 products. The laser engraver tool is easy to use and also features a safety cover. The device has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a really functional etching maker. It cam be utilized to inscribe on all types of materials/.
Here is a list of products as well as functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out equipment. Exact, quick and well constructed. It comes with a premium rate, however it is worth it for a person that wants a great and also almost an industrial quality table top laser engraver capable of rapid cutting as well as exact inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving as well as reducing machine on our checklist is XTool D1 pro, the best choice to Glowforge. It is in starting point since it has gotten the Red Dot Layout 2022 Honor. The outstanding layout and also state-of-the-art modern technology set this maker aside from other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, as well as XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce and also engrave a substantial selection of materials, from something as slim as tissue paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving and reducing device that works with a variety of products, including different sorts of wood. Its powerful and highly concentrated laser can easily reduce as well as engraved wood with supreme accuracy and precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is specifically created metal and plastic engraving. It can etch various steels, including light weight aluminum as well as rare-earth elements. It can additionally do colored inscribing on various steels, including light weight aluminum.
Supply Small Fiber Laser Cutting Machine Pricelist Supply Small Fiber Laser Cutting Machine Pricelist