What is the Makeblock XTool D1? Valve Tag Engraving Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Valve Tag Engraving Machine
The company was developed in 2012 by Jasen Wang, who researched airplane layout at Northwestern Polytechnic University. The company is devoted to developing innovative products to aid people express themselves via production. Considering that its creation, Makeblock has launched a number of instructional robots, along with a coding system for children. It additionally launched the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can cutting and also engraving a range of products. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, and also can be utilized for various projects. Along with inscription, the D1 can additionally be made use of for other projects, including developing jewelry and light shades.
The D1 is a DIY set that can be set up in just concerning half a hr. Its room is collapsible, permitting simple transportability and also reliable ventilation. It is also constructed from flame-retardant polyester, making it safe from dust particles. The enclosure likewise shields the functioning surface under the machine.
The XTool D1 is furnished with a laser component that can engrave on steels and also lots of other products. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer inscription and greater precision.
The D1 additionally has a high resolution of 1000 DPI, which makes it feasible to engrave on a wide variety of materials. The D1 likewise has an integrated smart device app that can be downloaded from the Android Store or the Apple Application Store. The application can be used to import laser layouts from complimentary vector sites, including Etsy. The D1 can likewise be connected to a computer by means of USB or WiFi. It can also transfer data using Wi-Fi or a large capability TF card.
The D1 is capable of etching on Poplar plywood, which is one of one of the most frequently made use of woods for laser cutters. The D1 can also cut on various other timbers, consisting of hard maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm array. It can also process materials approximately 10mm thick, which suggests that it is able to etch on a wide variety of materials. The D1 is created for both home and company use.
The XTool D1 can be found in 2 versions: the 20W version and the 5W version. The 20W variation has a bigger laser head, as well as a smaller working location. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster device. Valve Tag Engraving Machine
The D1 includes a steel structure, which provides maximum security as well as durability. It also has a synchronous belt to boost motion precision. The belt’s moderate stress is required for accuracy, especially when relocating at high speeds. The concurrent belt can likewise help the device keep steady and also reduce vibration. It can likewise eliminate the motion gap, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It generates clear lines down to 0.06 mm. This makes it an exceptional selection for almost all inscribing jobs. Its design is risk-free as well as trusted. It is ideal for local business and hobbyists.
It can engrave different sorts of metal as well as wood. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the ability to reduce natural leather and polymer.
It features a variety of accessories. You can acquire the package pack that consists of the Air Help Set and also Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can additionally obtain a 1064nm laser head. This head minimizes burn marks in plastic as well as is especially beneficial for fragile fashion jewelry styles. It likewise has a movement sensor and fire discovery sensor.
It additionally includes an emergency situation quit switch. It can be regulated through WiFi and can import laser designs from cost-free vector sites like Etsy. You can additionally regulate it via the Makeblock XTool D1 app on Android and also iOS.
It has a great emphasis device. The laser crosshairs move as required and relocate to the frame of the artwork. This makes the inscribing very exact. It can likewise be made use of to produce a thickening result, which can be valuable when etching huge products.
The XTool D1 Pro has actually boosted attributes and also laser power. It makes use of a 20W laser module to create a beam of light that reduces things in one pass. It can puncture 8mm black acrylic and 10mm basswood. It additionally has a higher rate. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this maker is really creative. Beside the laser module, there is a swivelling arm which you take out when you wish to concentrate the laser. It assures that you drop the head on the correct range from the material. After that you tighten the thumb screw and also rotate the arm back up. Valve Tag Engraving Machine
XTool D1 Special Features
Below are a few of the top Unique Features of the XTool D1:
Wireless Connectivity
Maker can be attached via USB or a WiFi. And you can likewise regulate with a smart device app on Android or iphone.
Cutting and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise a really qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The machine can cut timber, especially Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would prevent some plastics like PVC and also plastic since it releases hydrogen chloride gas while being reduced. This gas is hazardous as well as really destructive (your maker will rust promptly).
We have tested the equipment with engraving and also reducing different products. You will certainly find the results of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other devices. This should enable even more accuracy and also less mechanical wobble when inscribing at broadband. Valve Tag Engraving Machine
Advanced Stepper Electric Motor Drivers
The equipment has an extremely sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the motors with a pure sine wave. This way the electric motors are really exact and also silent. The vehicle drivers additionally support homing treatment without making use of limitation switches over as the vehicle drivers measure current with electric motors and identify the limit this way. This is why this device does not require physical restriction switches over for homing.
The device has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of needing to detach among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device automatically quits if an unintended touch takes place. This is great for individuals who are concerned regarding security. The tool is likewise compatible with Windows and also Mac OS systems.
The XTool D1 software application is extremely easy to use. Once you have actually the art work prepared, you can utilize the app to establish the laser. You can additionally customize the laser setups as well as create custom-made art work. The application additionally includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can engrave over 100 materials. The laser engraver tool is easy to use and comes with a safety cover. The maker has a service warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely versatile engraving equipment. It cam be utilized to inscribe on all types of products/.
Right here is a listing of products and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered equipment. Accurate, quick as well as solidly developed. It comes with a premium cost, however it is worth it for somebody that wants a good as well as almost a commercial grade table top laser engraver with the ability of rapid cutting as well as precise inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving and cutting equipment on our listing is XTool D1 pro, the very best choice to Glowforge. It is in top place because it has actually gotten the Red Dot Design 2022 Honor. The impressive layout and cutting edge technology set this device in addition to other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, as well as XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as etch a substantial selection of materials, from something as slim as tissue paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser engraving and also reducing device that works with a large range of products, including different kinds of wood. Its powerful as well as highly focused laser can conveniently cut and also engraved wood with utmost precision and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is particularly created metal and also plastic inscription. It can inscribe various metals, consisting of aluminum and also rare-earth elements. It can additionally do tinted inscribing on various metals, consisting of light weight aluminum.