What is the Makeblock XTool D1? Xtool Laptop Tracker Software
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool Laptop Tracker Software
The company was established in 2012 by Jasen Wang, who examined airplane layout at Northwestern Polytechnic College. The firm is committed to creating ingenious items to assist individuals share themselves with production. Given that its production, Makeblock has actually launched a number of instructional robots, along with a coding platform for kids. It also launched the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can cutting as well as inscribing a variety of products. Its laser can remove complex shapes much faster than a scroll saw or jigsaw, and also can be made use of for several tasks. Along with inscription, the D1 can additionally be made use of for other tasks, consisting of developing jewelry and lamp tones.
The D1 is a DIY set that can be constructed in just about half an hour. Its room is foldable, enabling very easy transportability as well as efficient ventilation. It is likewise constructed from flame-retardant polyester, making it safe from dust particles. The unit also safeguards the working surface area under the machine.
The XTool D1 is equipped with a laser module that can engrave on metals and also numerous other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription and also greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to engrave on a large range of products. The D1 additionally has an integrated mobile phone app that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be used to import laser layouts from free vector sites, consisting of Etsy. The D1 can also be attached to a computer system via USB or WiFi. It can also move information by means of Wi-Fi or a huge ability TF card.
The D1 can inscribing on Poplar plywood, which is one of one of the most typically utilized woods for laser cutters. The D1 can also reduce on various other woods, consisting of hard maple, walnut, as well as rosewood. Its laser head is flexible, enabling a 50mm range. It can likewise refine materials up to 10mm thick, which implies that it is able to inscribe on a wide array of materials. The D1 is made for both house and service usage.
The XTool D1 can be found in two models: the 20W version and also the 5W design. The 20W variation has a bigger laser head, and a smaller sized working area. The 5W version has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster machine. Xtool Laptop Tracker Software
The D1 features a steel framework, which provides optimum stability as well as resilience. It additionally has a simultaneous belt to boost movement accuracy. The belt’s modest tension is needed for precision, particularly when moving at high speeds. The synchronous belt can additionally assist the equipment keep steady and reduce vibration. It can likewise get rid of the movement gap, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It produces clear lines to 0.06 mm. This makes it an outstanding selection for nearly all engraving jobs. Its design is risk-free and reputable. It is perfect for small companies and hobbyists.
It can engrave different sorts of steel and also timber. It has the ability to reduce eight to tenmm plywood in one pass. It also has the capacity to cut natural leather as well as polymer.
It includes a number of accessories. You can purchase the bundle pack that includes the Air Assist Set and Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can additionally obtain a 1064nm laser head. This head lowers burn marks in plastic and is particularly valuable for fragile precious jewelry layouts. It additionally has an activity sensing unit as well as fire discovery sensor.
It also features an emergency quit button. It can be regulated through WiFi as well as can import laser layouts from complimentary vector sites like Etsy. You can additionally regulate it by means of the Makeblock XTool D1 application on Android as well as iphone.
It has a very good emphasis mechanism. The laser crosshairs move as required and also move to the structure of the art work. This makes the inscribing very exact. It can also be made use of to produce a thickening impact, which can be useful when inscribing large things.
The XTool D1 Pro has enhanced features and laser power. It utilizes a 20W laser module to produce a beam that cuts items in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a higher rate. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this equipment is very brilliant. Beside the laser component, there is a rotating arm which you pull out when you intend to concentrate the laser. It guarantees that you go down the head on the proper range from the product. After that you tighten the thumb screw as well as pivot the arm back up. Xtool Laptop Tracker Software
XTool D1 Special Features
Below are a few of the top Special Functions of the XTool D1:
Wireless Connection
Machine can be linked via USB or a WiFi. As well as you can likewise control with a mobile phone app on Android or iOS.
Trimming as well as Inscription Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a very capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The machine can reduce timber, especially Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would certainly prevent some plastics like PVC as well as plastic given that it launches hydrogen chloride gas while being reduced. This gas is poisonous and also very corrosive (your equipment will certainly corrosion rapidly).
We have actually checked the maker with engraving and cutting various products. You will discover the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all various other devices. This need to allow for even more precision and also much less mechanical wobble when inscribing at broadband. Xtool Laptop Tracker Software
Advanced Stepper Motor Drivers
The device has a very sophisticated controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. This way the electric motors are very accurate and also quiet. The drivers additionally support homing procedure without utilizing limit switches over as the motorists determine existing through electric motors and also spot the limit this way. This is why this machine does not need physical restriction switches over for homing.
The device has motorists for 3 axis– so you can plug in the roller system as a Z axis instead of having to separate one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed via Wi-Fi or USB. The laser engraver device instantly stops if an unexpected touch occurs. This is terrific for individuals that are worried about security. The device is also compatible with Windows and also Mac OS systems.
The XTool D1 software program is very easy to use. When you have the art work prepared, you can make use of the app to set up the laser. You can also customize the laser settings and also create custom artwork. The app additionally includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can etch over 100 products. The laser engraver device is easy to use and also comes with a protective cover. The equipment has a warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible engraving equipment. It cam be used to engrave on all kinds of products/.
Right here is a listing of products as well as functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out maker. Precise, quick and also well constructed. It comes with a premium price, however it is worth it for a person that wants an excellent and nearly an industrial quality table leading laser engraver efficient in rapid cutting as well as exact engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving as well as cutting machine on our list is XTool D1 pro, the most effective choice to Glowforge. It remains in top place since it has gotten the Red Dot Design 2022 Award. The exceptional style and also modern innovation set this machine in addition to other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, as well as XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce as well as etch a big variety of materials, from something as slim as cells paper to something as thick as natural leather and also timber panels.
XTool D1 is a diode laser inscription and reducing device that works with a variety of products, including different sorts of timber. Its effective as well as highly concentrated laser can quickly cut as well as engraved wood with ultimate precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser module, which is specifically created steel and also plastic engraving. It can etch different steels, consisting of light weight aluminum and rare-earth elements. It can also do colored engraving on different metals, consisting of aluminum.