What is the Makeblock XTool D1? Xtool X100 Pad2 User Manual
XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool X100 Pad2 User Manual
The firm was developed in 2012 by Jasen Wang, that examined airplane layout at Northwestern Polytechnic College. The business is devoted to creating cutting-edge products to aid individuals reveal themselves with production. Given that its production, Makeblock has released numerous educational robots, as well as a coding system for youngsters. It additionally launched the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can reducing and also etching a selection of products. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, and can be used for many different tasks. In addition to inscription, the D1 can likewise be used for other jobs, including producing precious jewelry as well as lamp shades.
The D1 is a do it yourself set that can be put together in just about half a hr. Its enclosure is foldable, allowing for simple transportability and efficient ventilation. It is likewise constructed from flame-retardant polyester, making it safe from dirt bits. The enclosure also protects the functioning surface under the machine.
The XTool D1 is equipped with a laser component that is capable of engrave on metals and also many other products. It has actually an ultra-fine pressed laser area of 0.08 x 0.08 mm. This allows for finer inscription as well as greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, which makes it possible to engrave on a wide variety of materials. The D1 also has a built-in smartphone application that can be downloaded from the Android Shop or the Apple Application Shop. The application can be used to import laser designs from cost-free vector sites, consisting of Etsy. The D1 can likewise be attached to a computer system by means of USB or WiFi. It can also move information using Wi-Fi or a big capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most typically utilized woods for laser cutters. The D1 can likewise reduce on other woods, consisting of difficult maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm range. It can likewise process products up to 10mm thick, which indicates that it is able to etch on a wide array of materials. The D1 is created for both residence and also organization use.
The XTool D1 is available in two models: the 20W variation and the 5W version. The 20W variation has a larger laser head, as well as a smaller sized working area. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker maker. Xtool X100 Pad2 User Manual
The D1 features a steel structure, which supplies maximum security and also sturdiness. It likewise has a simultaneous belt to improve movement precision. The belt’s moderate tension is needed for precision, specifically when relocating at high speeds. The concurrent belt can also help the equipment remain secure as well as reduce resonance. It can also remove the motion space, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it an excellent selection for nearly all etching tasks. Its design is secure as well as trustworthy. It is excellent for small companies as well as enthusiasts.
It can engrave various types of metal as well as timber. It has the capability to reduce 8 to tenmm plywood in one pass. It likewise has the capacity to reduce leather and polymer.
It includes a variety of devices. You can buy the bundle pack that includes the Air Help Set and Honeycomb Working Panel. It costs $119 and $269, respectively. You can likewise obtain a 1064nm laser head. This head minimizes burn marks in plastic and is especially helpful for delicate fashion jewelry designs. It likewise has a movement sensor and also flame discovery sensor.
It additionally includes an emergency stop switch. It can be managed via WiFi and can import laser designs from free vector sites like Etsy. You can also regulate it through the Makeblock XTool D1 application on Android as well as iOS.
It has a very good focus system. The laser crosshairs move as needed as well as move to the frame of the art work. This makes the inscribing really specific. It can likewise be used to produce a thickening impact, which can be helpful when etching big things.
The XTool D1 Pro has actually improved functions and laser power. It makes use of a 20W laser component to produce a light beam that cuts items in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a higher rate. It can reach etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is really smart. Alongside the laser component, there is a pivoting arm which you take out when you wish to concentrate the laser. It assures that you go down the head on the proper range from the product. After that you tighten the thumb screw and swivel the arm back up. Xtool X100 Pad2 User Manual
XTool D1 Special Features
Below are several of the leading Special Attributes of the XTool D1:
Wireless Connectivity
Maker can be connected via USB or a WiFi. And you can likewise control with a smartphone application on Android or iOS.
Trimming and Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is also a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The machine can cut wood, specifically Poplar plywood which is soft as well as it is the favored wood for all laser cutters.
I would prevent some plastics like PVC and plastic considering that it launches hydrogen chloride gas while being reduced. This gas is toxic and also extremely destructive (your equipment will corrosion swiftly).
We have checked the maker with inscription and reducing various materials. You will discover the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other devices. This need to enable even more precision and less mechanical wobble when etching at broadband. Xtool X100 Pad2 User Manual
Advanced Stepper Electric Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. By doing this the motors are really specific and also silent. The drivers additionally support homing procedure without utilizing restriction switches over as the drivers gauge existing via motors as well as spot the limit this way. This is why this device does not need physical limitation switches over for homing.
The device has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver tool automatically stops if an unintentional touch happens. This is wonderful for people who are worried concerning safety and security. The device is also suitable with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. As soon as you have the artwork prepared, you can make use of the application to set up the laser. You can also personalize the laser setups and develop customized art work. The application also includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 materials. The laser engraver device is easy to use and also features a protective cover. The machine has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is a really functional inscribing equipment. It cam be used to engrave on all types of materials/.
Right here is a list of materials and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered machine. Exact, rapid and well constructed. It comes at a premium rate, but it deserves it for a person that wants an excellent as well as practically an industrial grade table top laser engraver efficient in quick cutting and specific inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving as well as reducing device on our checklist is XTool D1 pro, the most effective alternative to Glowforge. It is in first place due to the fact that it has actually received the Red Dot Design 2022 Award. The impressive design and state-of-the-art innovation established this equipment aside from various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, as well as XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a big variety of materials, from something as slim as cells paper to something as thick as leather and also wood panels.
XTool D1 is a diode laser inscription and reducing machine that is compatible with a vast array of materials, including various kinds of timber. Its powerful and also extremely concentrated laser can easily reduce and also etched timber with ultimate precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is especially produced metal and plastic inscription. It can etch numerous steels, consisting of light weight aluminum and also precious metals. It can likewise do colored inscribing on different steels, including light weight aluminum.